HP Scanjet 4570c/5500c scanner

TMA

APF (HP Scanjet 5500c only)

install the software and connect the scanner

English

install the software first (Windows and Macintosh)

Set up your scanner in one of two ways: either install the software first or connect the scanner first. It is recommended that you install the software first, especially on a Macintosh computer.

If you experience difficulty installing your scanner, see installation problems - hp scanjet 4500c/5500c series on page 13.

1Close all open programs on your computer.

2Locate the HP Photo & Imaging software CD-ROM that is appropriate for your language and operating system and insert it into your computer.

3For a Microsoft Windows computer: Follow the instructions on the screen. Or, if the installation program does not start automatically:

a.On the Start menu, click Run.

b.Type: x:setup.exe (where x is the letter of the CD-ROM drive).

For a Macintosh computer: Double-click the Installation Read Me file on the CD-ROM and follow the instructions.

4If the instructions prompt you to shut down your computer, do so.

5Connect the USB cable between the USB port on the scanner and the USB port on the computer.

6Connect the power cable between the scanner and a surge protector or a grounded wall outlet that is easy to reach. This turns on the scanner.

7If necessary, turn your computer on again.

A “00” in the LCD on the front panel of the scanner indicates that a USB connection error has occurred. Check that the USB cable is securely connected between the scanner and the computer.

install the scanner

2