HP 6000Z, 6000T manual If you have the 8000 model, continue to step

Upgrading the Computer

3.Inside the computer on either the 6000 or 8000 model, locate the expansion slots on the system board.

❏If you have the 8000 model, continue to step 4.

❏If you have the 6000 model, skip to step 5.

4.On the 8000 model, remove the screw that secures the expansion card to the chassis.

5.Remove the expansion card from either a 6000 or 8000 model by holding the card at each end and carefully rocking it back and forth until the connectors pull free from the socket. Be sure not to scrape the card against the other components.

Removing an Expansion Card on the 6000/8000 (6000 shown)

8–24 Getting Started