HP 6000Z, 6000T manual With Yes selected, press Enter

Using Application Recovery and System Recovery

11.With Yes selected, press Enter.

The PC starts the recovery; wait for the onscreen instructions to display, and then follow those instructions.

❏For standard recovery, press R, and then press R again. Click Next to proceed with the non-destructive system recovery. Click Yes to start the recovery. Insert the remaining CDs when directed.

Or

❏If your PC hard disk drive is blank or corrupted, press R to perform a full system recovery. Insert the remaining CDs when directed.

12.When the recovery program finishes, click Restart to restart the computer.

13.Before the computer restarts, the CD tray ejects. Remove the CD.

14.Return the BIOS to the original setting. Enter the BIOS setup program during the startup by doing the following:

When the black screen with the Compaq logo appears, press the F1 key on the keyboard until Entering SETUP displays. (You have only a few seconds to press the F1 key before the normal setup process continues.) Wait until the BIOS setup program opens.

15.Press the right arrow key to select Boot.

16.Press the down arrow key to select Boot Device Priority, and then press Enter.

6–12 Getting Started