HP 6080 Pro manual Configuring the Apply Driver Package step

3.Highlight the Apply Operating System group. Click Add at the top left of menu.

4.Select Drivers, and then select Apply Driver Package. The newly added Apply Driver Package group will display after the Apply Operating System group.

5.Click Browse, and select the Mass Storage Controller driver package.

6.In the “Properties” tab, check the Select the mass storage driver within the package that needs to be installed before setup on Pre-Vista operating systems check box.

Figure 8 - Configuring the Apply Driver Package step

7.Choose the Mass Storage driver name and model that apply to your system(s) from the drop-down menus.

Note:

The section “XP Mass Storage Driver Requirements” shows the required XP Mass Storage driver models for the associated BIOS settings on HP systems. If your HP system is not listed in the table, see the following section “Searching for the Mass Storage Driver Model” to determine which Mass Storage driver model to choose from the task sequence drop-down list.

12