The status LCD displays PC to indicate the camera is connected to a computer. After a few seconds, the software starts. Follow the instructions in the software to complete the unload process.
Note | To pause the automatic unload, click anywhere in |
| the HP Automatic Image Unload Software window. |
| If you have no new images in your camera when |
| you connect it to the computer, the software appears |
| to unload images and then informs you that no new |
| images were found. |
|
|
You can set up the HP Automatic Image Unload software so that certain tasks occur automatically after the images are unloaded from the camera. You can:
lautomatically view your images.
lautomatically print your images.
lautomatically lay out a photo album page.
To set up the automatic tasks, in the HP Automatic Image Unload Software window, click Task Options. For more information,
Using the camera with a Windows NT 4.0 computer
Windows NT 4.0 does not support the USB interface, so you cannot connect your camera directly to your computer. You can save your images to a CF memory card (purchased separately) and then transfer them from the card to the computer through either a memory card slot in an HP printer equipped with one or through a memory card reader.
To use an HP printer that has a memory card slot
Follow the instructions in your printer documentation to transfer images from the memory card to your Windows NT 4.0 computer through the printer’s memory card slot.
Sharing and printing images | 29 |