Installing a CF memory card
Use only CompactFlash Association (CFA)
certified type 1 CF memory cards with your digital camera. These cards are manufactured
by several vendors and are available in a variety of memory sizes. You can purchase additional
CF memory cards from www.hpshopping.com (selected countries/regions only), or from your local digital
camera or electronics store.
To install a CF memory card
1Make sure the camera is turned off.
CAUTION Inserting or removing a CF memory card while the camera is on could damage the existing card or result in lost images.
2Open the CF memory card door.
3If there is a card already in the camera,
remove the existing card. To do this, locate the lever on the bottom of the camera under
the CF memory card door. Slide it toward the center of the camera. The card pops out.
4 Hold the new CF memory card so that the tiny ledge on the top rear of the card is
between your fingers, the side with pinholes
faces the camera, and the ledge on the back of the card faces the front of the camera.
5Insert the card firmly all the way into the camera.
CAUTION The card should fit easily almost all the way into the slot. If it stops when it is only partially inserted, turn the card over and try again. Do not force the card into the camera.
40 | HP photosmart 612 User Guide |