(Recommended) Use your network-ready printer CD-ROM.
Or, use the HP Jetdirect CD-ROM.

If Required, Configure Jetdirect With Your Network Settings

If your network requires that you configure network settings on the print server before you add the printer to your network systems, you can do so now.

However, in most cases, you can skip this section. Instead, you can proceed directly to Add the Printer to Your Network Server or System. Use network installation software to both configure basic network settings on the print server, and add the printer to your system configuration.

Configuration Tools

For Microsoft Windows

systems, use the network

setup software on the CD- ROM supplied with your printer (recommended), or

on the HP Jetdirect CD-ROM supplied with

the print server. This

software will allow you to both configure the print server for operation on your network and add the printer to your system. See Add the Printer to Your Network Server or System.

Note

Printer CD-ROM software may not support printer

 

setup on Novell NetWare or other networks. See

 

your printer documentation for supported

 

networks.

For TCP/IP networks, use a Web browser to access the embedded Web server on the HP Jetdirect print server. The Web pages on the print server allow you to configure network parameters.

ENWW

Installation Procedures 14

Page 14
Image 14
HP 615N manual If Required, Configure Jetdirect With Your Network Settings, Configuration Tools