HP 615N manual Client-Server Networks

4.Follow the instructions on the screens.

Note	The printer installation wizard runs from the CD-
	ROM. It copies files to a temporary directory on your
	system, and deletes them when it terminates.
	For a current version of the wizard that can be
	installed and run from your system disk, visit HP
	online support at:
	http://www.hp.com/support/net_printing

5.When prompted, print a test page to verify printer setup.

■If the test page successfully prints, then you have completed printer setup on this computer system. If this system was a server, see Client-Server Networks below.

■If the test page fails to print, perform the troubleshooting tasks displayed by the wizard. Click Help for more information. In addition, you can select Networking Help from the CD-ROM installation utility’s main screen.

For detailed troubleshooting information, read the

HP Jetdirect Print Server Administrator’s Guide for this print server. For information on accessing documents on the Jetdirect CD-ROM, refer to the section To View Documents on the CD-ROM.

Client-Server Networks

After you have set up the printer on the server, you will need to set up your network clients to access the printer through the server. The procedures depend on the available utilities for your particular clients and network operating system.

For example, if the printer was installed and shared on a Microsoft server, each Windows client can use Add Printer or Network Neighborhood utilities to access the printer.

For more information, refer to the documentation and help supplied with your network operating system.

ENWW Installation Procedures 18