HP 615N manual Cfg Ipx/Spx=, Cfg Link=, Web=, Https, Security=

Table C-1. EIO Classic Control Panel Menu (3 of 3)

Menu Item	Description
CFG IPX/SPX=	Selects whether you want to access the IPX/SPX menu
	and set IPX/SPX protocol parameters.
	● NO (default): Bypass the IPX/SPX menu items.
	● YES: Access the IPX/SPX menu items.
	In the IPX/SPX menu, you can specify the Frame Type
	parameter used on your network.
	■ AUTO (default) will automatically set and limit the frame
	type to the first one detected.
	■ For Ethernet cards, frame type selections include
	EN_8023, EN_II, EN_8022, EN_SNAP.
	.
	Selects whether you want to manually configure the
CFG LINK=	HP Jetdirect print server’s network link.
	● NO (default): Bypass the link configuration menu
	items.
	● YES: Access the link configuration menu items.
	One of the following link configurations can be set:
	■ AUTO (default): The print server will automatically
	configure itself to match the network’s link speed and
	communication mode. If it fails, 100T HALF is set.
	■ 10T HALF: 10 Mbps, half-duplex operation.
	■ 10T FULL: 10 Mbps, full-duplex operation.
	■ 100T HALF: 100 Mbps, half-duplex operation
	■ 100T FULL: 100 Mbps, full-duplex operation
WEB=	For configuration management, specify whether the
	embedded Web server will accept communications
	using HTTPS (Secure HTTP) only, or both HTTP and
	HTTPS.
	● HTTPS: For secure, encrypted communications,
	only HTTPS access is accepted. The print server
	will appear as a secure site.
	● HTTP/HTTPS: Access using either HTTP or
	HTTPS is permitted.
SECURITY=	Specify whether the current security settings on the print
	server will be saved or reset to factory defaults.
	● KEEP (default): The current security settings are
	maintained.
	● RESET: Security settings are reset to factory
	defaults.

ENWW HP Jetdirect EIO Control Panel Menus 39