Electromagnetic

J7934A (620n)

J6057A (615n)

 

 

● FCC Title 47 CFR Part 15 Class

● FCC Title 47 CFR Part 15 Class

B for Ethernet (USA)

A for Ethernet (USA)

● ICES-003 Class B (Canada)

● ICES-003 Class A (Canada)

● VCCI Class B (Japan)

● VCCI Class A (Japan)

● AS/NZS3548 Class B (Australia,

● AS/NZS3548 Class A (Australia,

New Zealand)

New Zealand)

● CISPR-22 Class B (1993)* for

● CISPR-22 Class A (1993)* for

Ethernet (International,

Ethernet (International,

Europe)

Europe)

● CNS 13438 Class B (Taiwan)

● CNS 13438 Class A (Taiwan)

● Korean EMI Law, No. 1996-98

● Korean EMI Law, No. 1996-98

Class A (Korea)

Class A (Korea)

 

 

*For EU immunity compliance, see the Declaration of Conformity, page 47.

Regulatory Statements

FCC Statements

CAUTION. Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the Hewlett-Packard Company may cause interference and void the FCC authorization to operate this equipment.

General Information. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The Federal Communications Commission has prepared a booklet titled Interference Handbook (1986), which may be helpful to you. This booklet (stock number 004-000-004505-7) may be purchased from the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.

FCC Class A for HP J6057A Ethernet or IEEE 802.3/802.3u. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications.

Installing this equipment in an FCC Level B product results in an FCC Level A Composite System (as defined in the FCC Rules and Regulations) when attached to an Ethernet (IEEE 802.3/802.3u) network.

ENWW

Specifications and Regulatory Statements 46