Introducing the Switch

Introducing the Switch

Front of the Switch

Switch LEDs

State

Meaning

 

 

 

1 The Blinking behavior is an on/off cycle once every 1.6 seconds, approximately. 2 The Blinking behavior is an on/off cycle once every 0.8 seconds, approximately.

LED Power Save Mode

The HP ProCurve 6600-24XG Switch (J9265A) has the ability to turn off defined groups of ports to save power through the use of a CLI command, “savepower”. This feature provides the capability to explicitly power down the ports, including the LEDs, for a group of un-used ports associated with a block number.

Block # Port Range

101-08

209-17

318-24

This is only a temporary setting. The command is not retained after a power cycle or reboot. For more information regarding this feature see the Management and Configuration Guide which is on the ProCurve Web site at www.procurve.com/manuals.

LED Mode Select Button and Indicator LEDs

The operation of the Mode LED is controlled by the LED Mode select button, and the current setting is indicated by the LED Mode indicator LEDs near the button. Press the button to step from one view mode to the next.

Port LEDs Link

and Mode

LED Mode select button

and indicator LEDs

Figure 1-4. ProCurve 6600-24G and 6600-24G-4XG Switches

1-8