Figure 2-1. Default air flow direction of the Series 6600 Switches is from power to ports.
The direction of air flow can be reversed from the default direction shown in figure 2-1 by reversing the direction of the fans. See step 3 below, Reversing the air flow.
Installation Procedures
Summary
1.Prepare the installation site (page 2-5). Ensure the physical environ- ment is properly prepared, including having the correct network cabling ready to connect to the switch and having an appropriate location for the switch. See page 2-3for some installation precautions.
2.Verify the switch passes self test (page 2-5). Plug the switch into a power source and observe that the LEDs on the switch’s front panel indicate correct switch operation. When self test is complete, unplug the switch.
3.(Optional) Reversing the air flow (page 2-8) The direction of air flow can be reversed from the default direction by reversing the fans.
4.Mount the switch (page 2-10).The Switch can be mounted in a 19-inch telco rack, or in an equipment cabinet.
