Power and Fault LEDs

Installing the Switch

Installation Procedures

Switch port LEDs

Test LED

Figure 2-3. Checking the LEDs on the 6600-24G and 6600-24G-4XG

Switch port LEDs

Power and

Test LED

Fault LEDs

Figure 2-4. Checking the LEDs on the 6600-24XGLED Behavior:During the self test:

•Initially, all the status, LED Mode and port LEDs are on for most of the duration of the test.

•Most of the LEDs go off and then may come on again during phases of the self test. For the duration of the self test, the Test LED stays on.

When the self test completes successfully:

•The Power and Fan Status LEDs remain on.

•The Fault and Test LEDs go off.

•The port LEDs on the front of the switch go into their normal operational mode:

Switch the Installing

2-7