Installing the Switch

Installation Procedures

4.Slide the switch into the rails

Figure 2-9. Sliding the switch into the rails

5.Hold the switch with attached brackets up to the rack and move it vertically until rack holes line up with the bracket holes, then insert and tighten the four number 12-24 screws holding the brackets to the rack.

 

Figure 2-10. Mounting in a rack

 

 

C a u t i o n

Make sure the air flow is not restricted in the front or back of the switch. See

 

Figure 2-1 on page 2-4for the air flow direction.

 

 

Switch the Installing

2-13