Introducing the Switch
Back of the Switch
Back of the Switch
Power supply and
Locator LEDs
| | | | | | | | | | |
| | | | | | | | | | |
Power supply | | AC power connector | | Fan tray assembly | | | |
| | | Extra power slot |
| | | | | | | | | | |
Figure 1-6. HP ProCurve Series 6600 Switches. The backs of all these switches are the same.
Power Connector
The Series 6600 Switches do not have a power switch; they are powered on when connected to an active AC power source. These switches automatically adjust to any voltage between 100--127 and 200--240 volts and either 50 or 60 Hz. There are no voltage range settings required.
Switch Features
The features of the Series 6600 Switches include:
■24 auto-sensing 10/100/1000Base-T RJ-45 ports with Auto-MDIX or 24 SFP+ 10-GbE ports. The 6600-24G-4XG has only 4 SFP+ 10-GbE ports.
■Four dual-personality ports—either the auto sensing 10/100/1000Base-T RJ-45 or the mini-GBIC can be used for each port. The 6600-24XG does not have these dual-personality ports.
■An auxiliary (USB) port for processing a USB command file.
■Plug-and-play networking—all ports are enabled—just connect the network cables to active network devices and your switched network is operational.
