HP 800 G1 manual Generating static, Preventing electrostatic damage to equipment

Generating static

The following table shows that:

●Different activities generate different amounts of static electricity.

●Static electricity increases as humidity decreases.

		Relative Humidity
Event	55%	40%	10%
Walking across carpet	7,500 V	15,000 V	35,000 V
Walking across vinyl floor	3,000 V	5,000 V	12,000 V
Motions of bench worker	400 V	800 V	6,000 V
Removing DIPs from plastic tube	400 V	700 V	2,000 V
Removing DIPs from vinyl tray	2,000 V	4,000 V	11,500 V
Removing DIPs from Styrofoam	3,500 V	5,000 V	14,500 V
Removing bubble pack from PCB	7,000 V	20,000 V	26,500 V
Packing PCBs in foam-lined box	5,000 V	11,000 V	21,000 V

These are then multi-packaged inside plastic tubes, trays, or Styrofoam.

NOTE: 700 volts can degrade a product.

Preventing electrostatic damage to equipment

Many electronic components are sensitive to ESD. Circuitry design and structure determine the degree of sensitivity. The following packaging and grounding precautions are necessary to prevent damage to electric components and accessories.

●To avoid hand contact, transport products in static-safe containers such as tubes, bags, or boxes.

●Protect all electrostatic parts and assemblies with conductive or approved containers or packaging.

●Keep electrostatic sensitive parts in their containers until they arrive at static-free stations.

●Place items on a grounded surface before removing them from their container.

●Always be properly grounded when touching a sensitive component or assembly.

●Avoid contact with pins, leads, or circuitry.

●Place reusable electrostatic-sensitive parts from assemblies in protective packaging or conductive foam.

10 Chapter 3 Routine care, SATA drive guidelines, and disassembly preparation