Removing the Side Panel

You must remove the side panel to add memory, insert add-in cards, install or remove drives, or change the battery.

1Turn off the computer and all peripherals.

2Disconnect the modem/phone cable.

3Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor).

4Loosen the two thumbscrews on the right side of the back panel. The first time you loosen these screws you’ll need a flathead screwdriver. (These screws do not detach; they’ll stay on the side panel loosely until you tighten them again.)

5Stand behind the computer, and place one hand on top of the chassis.

6Grasp the handle (A) with your other hand and pull the panel towards you until it stops.

A

7Lift the panel up and out. Set the panel aside.

4

hp pavilion home pc