7Push down the two retaining clips on the ends of the memory socket.
8Holding the new memory module by its edges only, remove it from the antistatic packaging. (Avoid touching the memory chips or the gold contacts on the module.) The memory module has one or two small notches on the lower edge that fit into raised bumps in the memory socket.
9Hold the memory module in alignment with the socket, aligning the notches with the bumps.
DIMM | DDR DIMM | RIMM |
10Push straight down on top of the memory module until it is fully seated in the socket. The retaining clips on the ends of the socket automatically lock it into position when the memory module is fully seated.
To reassemble the computer:
1If you moved any cabling, restore the cable connections and routing.
2Replace the fan duct and the side panel (see “Closing the Computer” on page 21).
3Reconnect the power cord and all other cables.
4Reconnect the modem/phone cable.
5Turn on the computer and all peripherals.
