Removing a Memory Module

1Turn off the computer and all peripherals.

2Disconnect the modem/phone cable.

3Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor).

4Remove the side panel and the fan duct (see “Removing the Side Panel” on page 4 and “Removing the Fan Duct” on page 5).

5Locate the memory sockets on the motherboard.

6Move any cabling out of the way, if necessary.

7Push down the two retaining clips on the ends of the socket until the memory module pops out of the socket.

DIMM and

RIMM

DDR DIMM

 

Warning: Do not pull the memory module out of the socket. Use the retaining clips to eject the module.

Avertissement : Ne tirez pas directement sur le module de mémoire. Servez-vous des clips pour l’éjecter.

8Holding the memory module by its edges only, lift it away from the socket. Store it in its antistatic packaging.

To install a new memory module in this socket, see “Installing a Memory Module” on page 9.

English

upgrading and servicing the pc

11