1

To load Tray 2 and Tray 3

 

1

Open the tray until it stops.

 

2

Adjust the left (Y) paper guide by pressing the tab on the guide and

 

 

set the guide to the correct paper size.

 

3

Adjust the front (X) paper guide by pressing the tab on the guide

 

 

and set the guide to the correct paper size.

2

4

Load a stack of media with the top of the stack toward the rear of

 

the tray. For singled-sided printing, the side to be printed on should

 

 

be down. For double-sided printing, the side to be printed on should

 

 

be up.

Note

For information about printing on special media, see the use guide.

5Set the paper lever to Standard if both guides are set to the same

3

Standard marking, such as Letter or A4. Otherwise, set the lever to

 

Custom.

6 Close the tray.

7 The paper size and type for this tray appears on the MFP control panel. Touch OK to verify or see the use guide to make changes.

8 Repeat steps 1 through 7 to load the other tray.

4

6

ENWW

Load Trays 1, 2, 3, and 4 25

English