HP 9050MFP, 9040MFP manual Installing Macintosh printing software

Note

Note

Installing Macintosh printing software
This section describes how to install Macintosh printing software. The software is supported on
Macintosh OS 8 or later.		English
To install Macintosh printing software for Mac OS 8.6 to 9.2
1	Connect the network cable between the HP Jetdirect print server and a network port.
2	Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If the
	CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop,
	and then double-click the Installer icon. This icon is located in the Installer/<language> folder
	of the Starter CD-ROM (where <language> is your language preference). For example, the
	Installer/English folder contains the Installer icon for the English printer software.
3	Follow the instructions on the computer screen.
4	Open the Apple Desktop Printer Utility located in the (Startup Disk): Applications: Utilities
	folder.
5	Double-clickPrinter (AppleTalk).
6	Next to Apple Talk Printer Selection, click Change.
7	Select the MFP, click Auto Setup, and then click Create.
8	On the Printing menu, click Set Default Printer.

The icon on the desktop will appear to be generic. All the print panels will appear in the print dialog in an application.

To install Macintosh printing software for Mac OS 10.1 and later

1Connect the network cable between the HP Jetdirect print server and a network port.

2Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop, and then double-click the Installer icon. This icon is located in the Installer/<language> folder of the Starter CD-ROM (where <language> is your language preference). For example, the Installer/English folder contains the Installer icon for the English printer software.

3Double-click the HP LaserJet Installers folder.

4Follow the instructions on the computer screen.

5Double-click the Installer icon for the desired language.

6On your computer hard drive, double-click Applications, Utilities, and then Print Center.

7Click Add Printer.

8Select the AppleTalk connection type on OS X 10.1 and the Rendezvous connection type on OS X 10.2.

9Select the MFP name.

10Click Add Printer.

11Close the Print Center by clicking the close button on the upper-left corner.

Macintosh computers cannot be connected directly to the MFP by using a parallel port.

ENWW Install software 31