HP A4800A Cable Specifications, For V-ClassSystems, Part, Table, Table, Number, Option, Number, Product, Chapter, Description, Description, Cable Specifications

HP A4800A Adapter Overview

Cable Specifications

Cable Specifications

The A4800A adapter supports High Voltage Differential (HVD) SCSI connections only. Internal cables for interconnection with the embedded CD-ROM drive and DAT tape drive are provided in the system.

The A5068A SCSI cable kit is required when connecting the A4800A adapter to internal, non-embedded SCSI devices. Table 1-2 below shows the parts that make up the A5068A kit.

Table 1-2	A5068A SCSI Cable Kit
	Description	Part
		Number
	10-inch SCSI shielded cable with back	A4700-67086
	shell
	68-pin HD SCSI terminator	A4700-67098

For more information on connecting the adapter to internal disk and tape devices, refer to the appropriate disk drive or tape drive product manual.

For V-Class Systems

If you are connecting external SCSI devices to an A4800A adapter installed in a V-Class system, you must use one of the cables shown in Table 1-3 below. Note that cables are normally supplied with the peripheral device.

Table 1-3	Cables for Connecting External SCSI Devices to the A4800A
	Adapter in V-Class Systems
	Description	Product	Option
		Number
	5-meter 68-pin HD/68-pin HD Male	A3401A	875
	inline terminator SCSI cable for
	V-Class

Chapter 1 11