Troubleshooting

Checking SCSI Bus Compatibility

Setting SCSI IDs

To use the SCSI command to set the initiator (SCSI) ID for an adapter, follow this syntax:

SCSI init bus_number slot_number ID_number

where

bus_number Specifies the number of the bus the adapter is installed on.

slot_number Specifies the number of the slot the adapter is in.

ID_num

Specifies the adapter’s SCSI ID number.

For example, to set the SCSI ID for the adapter installed on bus 5 slot 2 to 6 and then display the results, issue these commands:

SCSI init 5 2 6

SCSI init 5 2

The output (of the second command) could look something like this:

PCI device /5.2 = 6

40

Chapter 3