Installing the A4800A Adapter

Verifying Installation

 

 

Verifying Installation

 

 

After installing the adapter and attaching peripheral devices, verify that

 

 

all components are working. Refer to your system documentation for

 

 

information on verifying operation.

HP 9000

 

 

Step

1.

To verify that the adapter is correctly installed, execute the following

 

 

command:

 

 

ioscan -f

 

 

The ioscan output could look like this:

 

 

ext_bus 0 0/0/0 c720 CLAIMED INTERFACE Ultra wide SCSI

 

 

The third column represents the hardware path of the slot the adapter is

 

 

installed in. For information about the ioscan command, refer to your

 

 

operating system reference manual or the ioscan man page.

Step

2.

Verify that the adapter and driver display.

Step

3.

Verify that the devices you attached to the adapter display.

Chapter 2

31

Page 31
Image 31
HP A4800A manual Verifying Installation, Step