Installing the A5150A Adapter

Verifying InstallationVerifying Installation

After installing the adapter and attaching peripheral devices, verify that all components are working. Refer to your system documentation for information on verifying operation.

HP 9000

Step 1. To verify that the adapter is correctly installed, execute the following command:

ioscan -f

The ioscan output could look like this:

ext_bus 0 0/0/0 c720 CLAIMED INTERFACE Ultra 2 wide SCSI

The third column represents the hardware path of the slot the adapter is installed in. For information about the ioscan command, refer to your operating system reference manual or the ioscan man page.

Step 2. Verify that the adapter and driver display.

Step 3. Verify that the devices you attached to the adapter display.

Chapter 2

37