Troubleshooting

Checking SCSI Bus Compatibility

Displaying SCSI IDs

To use the SCSI command to display the initiator (SCSI) IDs for an adapter, follow this syntax:

SCSI init bus_number slot_number

where

bus_number Specifies the number of the bus the adapter is installed on.

slot_number Specifies the number of the slot the adapter is in.

For example:

•To display the SCSI ID for the adapter on bus 5 slot 2, issue this command:

SCSI init 5 2

The output could look something like this:

PCI device /5.2 = 7

•To list the SCSI IDs for all bus and slot numbers, issue this command:

SCSI init

Chapter 3

45