ECM-5510

1.6.3VIA VT1612A Audio Codec

VIA Technologies’ VT1612ATM 18-bit audio codec conforms to the AC’97 2.2. The VT1612A integrates Sample Rate Converters and can be adjusted in 1Hz increments. The analog mixer circuitry integrates a stereo enhancement to provide a pleasing 3D surround sound effect for stereo media.

Furthermore, an integrated headphone amplifier with thermal shutdown adds signal value by reducing the BOM. This codec is designed with aggressive power management to achieve low power consumption. When used with 3.3V analog supply, power consumption is further reduced. The primary applications for this part are desktop and portable personal computers multimedia subsystems.

1.6.4Ethernet

1.6.4.1 Realtek RTL8100C Ethernet Controller

The Realtek RTL8100C(L) is enhanced with an ACPI (Advanced Configuration Power Interface) management function for PCI in order to provide efficient power management for advanced operating systems with OSPM (Operating System Directed Power Management). It also supports remote wake-up (including AMD Magic Packet™ and Microsoft® Wake-up frame) to increase cost-efficiency in network maintenance and management.

•128-pin PQFP/LQFP (PQFP package pin-to-pin compatible with Realtek RTL8110S-32 Single-Chip Gigabit Ethernet Controller)

•Supports PCI/mini-PCI interfaces

•Integrates Fast Ethernet MAC, physical chip, and transceiver onto a single chip

•10Mbps and 100Mbps operation supporting N-way auto-negotiation

•Supports 25MHz Crystal or 25MHz OSC as the internal clock source

•Complies with PC99/PC2001 standards

•Supports ACPI power management

•Provides PCI bus master data transfer

•Provides PCI memory space or I/O space mapped data transfer

•Supports PCI clock speed of 16.75MHz-40MHz

•Advanced power saving mode

•Supports Wake-on-LAN and remote wake-up (AMD Magic Packet™, Link Change, and Microsoft® Wake-up frame)

•Half/Full duplex capability

•Supports Full Duplex Flow Control (IEEE 802.3x)

•Provides interface to 93C46 EEPROM to store resource configuration and ID parameters

•Provides PCI clock run pin

•Provides LED pins for network operation status indication

•2.5/3.3V power supply with 5V tolerant I/Os

•0.25µm CMOS process

18 ECM-5510 User’s Manual