User’s Manual
3.5.4Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
| Item |
| Options |
| Description |
|
| Enabled | This item allows to enable | ||
|
| Disabled | |||
|
|
|
|
| |
|
|
| Auto | The IDE PIO (Programmed Input/Output) fields | |
|
|
| let you set a PIO mode | ||
|
|
| Mode 0 | ||
|
|
| IDE devices that the onboard IDE interface | ||
| Master Drive PIO Mode |
| Mode 1 | ||
|
| supports. | Modes 0 through 4 provide | ||
| Slave Drive PIO Mode |
| Mode 2 | ||
|
| successively increased performance. In Auto | |||
|
|
| Mode 3 | ||
|
|
| mode, the system automatically determines the | ||
|
|
| Mode 4 | ||
|
|
| best mode for each device. | ||
|
|
|
| ||
|
|
|
| Ultra DMA implementation is possible only if | |
|
|
|
| your IDE hard drive supports it and the | |
| IDE Primary Master UDMA |
| Auto | operating environment includes a DMA driver | |
|
| (Windows 95 OSR2 or a | |||
| IDE Primary Slave UDMA |
| Disabled | ||
|
| master driver). If the hard drive and the system | |||
|
|
|
| ||
|
|
|
| software both support Ultra DMA, select Auto to | |
|
|
|
| enable BIOS support. | |
|
|
|
| Block mode is also called block transfer, | |
|
|
|
| multiple commands, or multiple sector | |
| IDE HDD Block Mode |
| Enabled | read/write. If the IDE hard drive supports block | |
|
| mode (most new drives do), select Enabled for | |||
|
| Disabled | |||
|
|
| automatic detection of the optimal number of | ||
|
|
|
| ||
|
|
|
| block read/writes per sector the drive can | |
|
|
|
| support. |
|
|
|
|
| Select Enabled if your system has a floppy disk | |
|
|
| Enabled | controller (FDC) installed on the system board | |
| Onboard FDC Controller |
| and you wish to use it. If you are not going to | ||
|
| Disabled | |||
|
|
| use FDC or the system has no floppy drive, | ||
|
|
|
| ||
|
|
|
| select Disabled in this field. | |