TouchPad button board
Description | Spare part number |
|
|
TouchPad button board (includes bracket and cable) | |
|
|
Before removing the TouchPad button board, remove the following components:
1.Battery (see Battery on page 30)
2.Service door (see Service door on page 31)
3.Hard drive (see Hard drive on page 32)
4.Optical drive (see Optical drive on page 34)
5.Keyboard (see Keyboard on page 39)
6.Top cover (see Top cover on page 41) Remove the TouchPad button board:
1.Release the ZIF connector (1) to which the TouchPad button board cable is attached, and then disconnect the cable (2) from the TouchPad.
2.Remove the screw (3).
3.Remove the TouchPad button board (4).
Reverse the above procedure to reassemble and install the TouchPad button board.
46 | Chapter 4 Removal and replacement procedures |
