Keyboard

Description

Spare part number

 

 

For use in the United States, Black

698694-001

 

 

For use in French Canada, Black

698694-DB1

 

 

Before removing the keyboard, remove the following components:

1.Battery (see Battery on page 30)

2.Service door (see Service door on page 31) Remove the keyboard:

1.Remove the Phillips 4.0 x 2.5 screw (1) in the WLAN module bay that secures the keyboard to the computer.

2.Using a thin, flat-bladed screwdriver, gently pry loose the three snaps (2) inside the battery bay to release the top edge keyboard tabs.

3.Turn the computer right-side up, with the front toward you.

4.Open the computer as far as possible.

5.Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest.

6.Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and then disconnect the keyboard cable (2) from the system board.

Component replacement procedures

39

Page 47
Image 47
HP C2M21UA, C2M29UA manual Keyboard