Display assembly

Description

Spare part number

 

 

39.6-cm(15.6-in) High Definition (HD), LED BrightView display assembly:

 

 

 

● For use in charcoal grey computer models

639512-001

 

 

● For use in Pacific blue computer models

701769-001

 

 

● For use in black computer models

707798-001

 

 

 

●

LCD rubber kit

640882-001

 

 

 

●

Display hinges

639511-001

 

 

 

●

Display hinge covers

640882-001

 

 

 

Before removing the display assembly, remove the following components:

1.Battery (see Battery on page 30)

2.Service door (see Service door on page 31)

3.Optical drive (see Optical drive on page 34)

4.WLAN module (see WLAN module on page 36)

5.Keyboard (see Keyboard on page 39)

6.Top cover (see Top cover on page 41)

7.USB board (see USB board on page 47) Remove the display assembly:

1.Turn the computer right-side up, with the front toward you.

2.Open the computer as far as possible.

3.Disconnect the display panel cable (1) from the system board and remove it from its routing channel.

4.Pull the antenna cables through the opening in the base enclosure (2), and then disengage the cables from the clip in the routing channel leading to the display hinge.

CAUTION: Support the display assembly when removing the display screws in the following steps. Failure to support the display assembly can result in damage to the assembly and other components.

5.Remove the five Phillips 6.0 x 2.5 screws (3) that secure the display assembly to the computer.

50

Chapter 4 Removal and replacement procedures