Security cable lock
NOTE: The security cable lock is included with the base enclosure, spare part number
Before removing the security cable lock, remove the following components:
1.Battery (see Battery on page 30)
2.Service door (see Service door on page 31)
3.Hard drive (see Hard drive on page 32)
4.Optical drive (see Optical drive on page 34)
5.Keyboard (see Keyboard on page 39)
6.Top cover (see Top cover on page 41) Remove the security cable lock:
1.Remove the two Phillips 4.0 x 2.5 screws that secure the security lock to the base enclosure.
2.Lift the security lock straight up to remove it from the computer.
Reverse this procedure to install the security cable lock.
48 | Chapter 4 Removal and replacement procedures |
