WLAN module
Description | Spare part |
| number |
|
|
Ralink RT5390R 802.11 b/g/n 1×1 WiFi | |
|
|
Before removing the WLAN module, remove the following components:
1.Battery (see Battery on page 30)
2.Service door (see Service door on page 31) Remove the WLAN module:
1.Disconnect the main antenna cable (1) and the auxiliary antenna cable (2) from the wireless module.
2.Remove the two Phillips 3.0 x 2.0 screws (3) that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.)
3.Remove the WLAN module (4) by pulling it away from the slot at an angle.
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support.
NOTE: WLAN modules are designed with a notch (5) to prevent incorrect insertion into the WLAN module slot.
Reverse this procedure to install a WLAN module.
36 | Chapter 4 Removal and replacement procedures |
