Chapter 5

Use printer sharing

If your computer is on a network, and another computer on the network has an HP All- in-One connected to it by a USB cable, you can print to that printer using printer sharing.

The computer directly connected to the HP All-in-One acts as the host for the printer and has full software functionality. The other computer, which is referred to as a client, has access only to the print features. You must perform other functions, such as scanning and copying, from the host computer or from the control panel on the HP All-in-One.

To enable printer sharing on a Windows computer

▲Refer to the user guide that came with your computer or see the Windows onscreen Help.

setup Finish

Connect to a network

This section describes how to connect the HP All-in-One to a network and how to view and manage network settings.

For optimal performance and security in your wireless network, HP recommends you use a wireless router or access point (802.11) to connect the HP All-in-One and the other network elements. When network elements are connected through a wireless router or access point, this is called an infrastructure network.

If you connect the HP All-in-One directly to a wireless-capable computer, without using a wireless router or access point, this is known as an ad hoc network. You might only be able to connect to one wireless device at a time with an ad hoc connection.

The advantages of a wireless infrastructure network as compared to an ad hoc network include:

•Advanced network security

•Enhanced reliability

•Network flexibility

•Better performance, especially with 802.11 g mode

 

If you want to:

See this section:

 

 

 

 

 

Connect to a wireless network with a wireless

“Integrated wireless WLAN 802.11 network

 

router (infrastructure).

setup” on page 17

 

 

 

 

 

Connect directly to a wireless-capable

“Wireless ad hoc network setup” on page 18

 

computer without a wireless router (ad-hoc).

 

 

 

 

 

 

Add connections to more computers on the

“Connect to additional computers on a

 

network.

network” on page 21

 

 

 

 

 

Change the HP All-in-One from a USB

“Change the HP All-in-One from a USB

 

connection to a network connection.

connection to a network connection”

 

 

 

on page 22

 

NOTE: Use the instructions in this section if

 

 

 

you first installed the HP All-in-One with a USB

 

 

connection, and you now want to change to a

 

 

wireless network connection.

 

 

 

 

 

 

Find troubleshooting information.

“Wireless setup troubleshooting” on page 108

 

 

 

 

16 Finish setting up the HP All-in-One