1.Press the Wireless button on the front of the HP
2.Press the button next to the icon on the display until Print Network Configuration Page is highlighted, and then press the button next to OK.
Related topics
“Network configuration page definitions” on page 24
Restore network defaultsYou can reset the network settings to what they were when you purchased the HP
1.Press the Wireless button on the front of the HP
2.Press the button next to the icon on the display until Restore Network Defaults is highlighted, and then press the button next to OK.
3.Confirm that you want to restore the network defaults.
Turn the wireless radio on and offThe wireless radio is off by default, but when you install the software and connect the HP
1.Press the Wireless button on the front of the HP
2.Press the button next to the icon on the display until Turn Radio On or Turn Radio Off is highlighted, and then press the button next to OK.
Print the wireless network testThe wireless network test performs a series of diagnostic tests to determine whether network setup is successful. If an issue is detected, a recommendation on how to correct the issue will be included on the printed report. You can print the wireless network test at any time.
Finish setup
1.Press the Wireless button on the front of the HP
2.Press the button next to the icon on the display until Wireless Network Test is highlighted, and then press the button next to OK.
The Wireless Network Test prints.Related topics
Connect to a network | 23 |