Chapter 6

To load index cards in the input tray

1.Remove all paper from the input tray.

2.Insert the stack of cards, print side down, into the far-right side of the input tray. Slide the stack of cards forward until it stops.

3.Slide the paper-width guide inward against the stack of cards until it stops.

Do not overload the input tray; make sure the stack of cards fits within the input tray and is no higher than the top of the paper-width guide.

Related topics

•“Load 10 x 15 cm (4 x 6 inch) photo paper” on page 36

•“Change the print settings for the current job” on page 42

originals Load load and paper

Load envelopes

You can load one or more envelopes into the input tray of the HP All-in-One. Do not use shiny or embossed envelopes or envelopes that have clasps or windows.

NOTE: For specific details on how to format text for printing on envelopes, consult the help files in your word processing software. For best results, consider using a label for the return address on envelopes.

To load envelopes

1.Remove all paper from the input tray.

2.Insert one or more envelopes into the far-right side of the input tray, with the envelope flaps on the left and facing up. Slide the stack of envelopes forward until it stops.

TIP: To avoid paper jams, tuck the flap inside each envelope.

3.Slide the paper-width guide inward against the stack of envelopes until it stops.

Do not overload the input tray; make sure the stack of envelopes fits within the input tray and is not higher than the top of the paper-width guide.

38 Load originals and load paper