Load paper

This section describes the procedure for loading different types and sizes of paper into the HP All-in-One for your copies or printouts.

NOTE: After a copy or print job has started, the paper width sensor can determine whether the paper is Letter, A4, or a smaller size.

TIP: To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a resealable bag. If the paper is not stored properly, extreme changes in temperature and humidity might result in curled paper that does not work well in the HP All-in-One.

This section contains the following topics:

•Load full-size paper

•Load 10 x 15 cm (4 x 6 inch) photo paper

•Load index cards

•Load envelopes

•Load other types of paper

Load full-size paper

You can load many types of letter or A4 paper into the input tray of the HP All-in-One.

To load full-size paper

1.Slide the paper-width guide to its outermost position.

Load originals and load paper

NOTE: If you are using letter, A4, or smaller paper, make sure the tray extender is open all the way.

2.Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following:

•Make sure it is free of rips, dust, wrinkles, and curled or bent edges.

•Make sure all the paper in the stack is the same size and type.

Load paper

35