HP c7000 manual Half-height or full-height blade

4.Lift the left side of the device bay shelf to disengage the three tabs from the divider wall, and then remove it from the enclosure.

To replace the component, reverse the removal procedure.

Half-height or full-height blade

CAUTION: This procedure provides instructions for replacement of a failed part only. To change the configuration of components, see the appropriate HP BladeSystem c-Class enclosure setup and installation guide.

To remove the component:

1.Identify the proper half-height or full-height blade in the enclosure ("Device bay numbering" on page 56).

2.Back up all data.

3.Power down the half-height or full-height blade ("Power down the server blade" on page 29).

4.Remove the blade:

Removal and replacement procedures 33