HP c7000 manual Interconnect bay dividers

4.Remove the interconnect switch or Pass-Thru module.

CAUTION: For best cooling practices, do not operate the enclosure for extended periods with more than one component or blank removed. When removing an active component, replace it with a blank.

To replace the component, reverse the removal procedure.

Interconnect bay dividers

To remove the component:

1.Remove the interconnect switches and Pass-Thru modules ("Interconnect switch or Pass-Thru module" on page 38).

2.Remove the interconnect blanks ("Interconnect blank" on page 37).

3.Press the release tab.

Removal and replacement procedures 39