HP c7000 manual Active Cool fan, Interconnect blank

Active Cool fan

CAUTION: This procedure provides instructions for replacement of a failed part only. To change the configuration of components, see the appropriate HP BladeSystem c-Class enclosure setup and installation guide.

To remove the component:

1.Turn the handle counterclockwise.

2.Remove the fan.

CAUTION: For best cooling practices, do not operate the enclosure for extended periods with more than one component or blank removed. When removing an active component, replace it with a blank.

To replace the component, reverse the removal procedure.

When installing the bottom fans, invert them so that the fan LED is in the top left corner.

Interconnect blank

To remove the component:

1.Press the release tabs.

Removal and replacement procedures 37