82 Installing System Components
Figure 3-21. Removing and Installing the Optical Drive Tray
Installing the Optical Drive1
Align the optical drive tray with its opening in the front panel.
The optical drive opening is above the hard-drive slots on the far right, or the flex bay, depending on
your system’s drive configuration (the hard-drives slots are identified by labels on the front panel of the
system).
2
Slide in the drive tray until the tray snaps into place. See Figure3-21.
3
Connect the optical drive cable to the connector on the back of the drive.
4
Close the system. See "Closing the System" on page55.
5
Replace the bezel. See "Replacing the Front Bezel" on page54.
6
Reconnect your system and peripherals to their electrical outlets, and turn on the system.
1 optical-drive cable 2 optical-drive release tab 3 optical -drive tray
4 optical drive
2
4
3
1
Book.book Page 82 Friday, February 3, 2006 11:09 AM