Integrated Devices Screen
Table
Table
OptionDescription
Integrated SAS Controller Enables or disables the integrated SAS controller. (Enabled default)
Embedded SATA (Off Allows the integrated SATA controller to be set to Off or ATA Mode. default)
IDE
(Auto default) integrated IDE controller is enabled if IDE devices are attached to the channel and the external IDE controller is not detected.
NOTE: This
User Accessible USB Ports Enables or disables the system’s user accessible USB ports. Options are All Ports
(All Ports On default) On, Only Back Ports On, and All Ports Off.
Embedded Gb NIC1 | Enables or disables the system's integrated NIC. Options are Enabled without |
(Enabled with PXE | PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot |
default) | from the network. Changes take effect after the system reboots. |
|
|
MAC Address | Displays the MAC address for the integrated 10/100/1000 NIC. This field does not |
| have |
|
|
TOE Capability | Displays the TCP/IP offload engine (TOE) feature status of the onboard NIC. |
|
|
Embedded Gb NIC2 | Enables or disables the system's integrated NIC. Options are Enabled without |
(Enabled with PXE | PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot |
default) | from the network. Changes take effect after the system reboots. |
|
|
MAC Address | Displays the MAC address for the integrated 10/100/1000 NIC. This field does not |
| have |
|
|
TOE Capability | Displays the TCP/IP offload engine (TOE) feature status of the onboard NIC. |
|
|
Diskette Controller | Enables or disables the system's diskette drive controller. When Auto is selected, |
(Auto default) | the system turns off the controller when necessary to accommodate a controller |
| card installed in an expansion slot. You can also configure the drive as |
| or Off. When using the |
| disk. |
|
|
42
