Removing the Cooling Shroud
1The cooling shroud is secured with a latch at the end of the shroud. Release the latch by pulling it towards the outside wall of the chassis. See Figure
2Rotate the shroud upward and toward the front of the system on its hinges, and then lift the shroud out of the system.
Figure 3-10. Removing and Installing the Cooling Shroud
2 | 3 |
1
4
|
|
|
| 5 |
|
1 | shroud pivots (2) | 2 | cooling shroud | 3 | release latch |
4 | shroud hinges (2) | 5 | fan bracket |
|
|
Installing the Cooling Shroud
1Align the hinges on the shroud pivots located on either end of the fan bracket. See Figure
2Slowly lower the shroud straight down into the system until the fan connector engages and the latches snap into place.
Installing System Components
67