Figure 3-36. System Board Removal

2

3

1

4

1

system-board tray

2

system-board tray riser

3

system board

 

 

 

release pin

 

 

4system-board securing tabs

Installing the System Board

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

1Lower the system-board tray until the tray sits flat on the bottom of the chassis.

2Ensure that all 17 system-board securing tabs are fully inserted into the 17 system-board securing slots. See Figure 3-36.

3Slide the system-board tray toward the back of the chassis until it locks into position.

4Replace the SAS backplane. See "Installing the SAS Backplane Board" on page 104.

108

Installing System Components

Page 108
Image 108
Dell 2950 owner manual Installing the System Board, Release pin System-board securing tabs