Removing the Central Riser Board
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.
1Press the blue release tab in the center of the central riser to release the board from the system board socket while easing both ends of the riser upward.
2Lift the central riser board from the two guide pins on either end, and draw the riser away from the system board.
Figure 3-32. Replacing the Central Riser Board
2 | 3 |
|
1
4
5
1 | card guide (2) | 2 | release tab | 3 | central riser board |
4 | guide pins (2) | 5 | system board socket |
|
|
Installing the Central Riser Board
1Fitting the two guides over the guide pins on the system board, gently lower the central riser board until the board connector is firmly seated into the system board socket. See Figure
