Connecting to a wired network

Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.

To connect the network cable:

WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem cable or telephone cable into an RJ-45 (network) jack.

1.Plug the network cable into the network jack (1) on the computer.

2.Plug the other end of the cable into a network wall jack (2).

24 Chapter 3 Internet

Page 32
Image 32
HP CQ10-120CA, CQ10-112NR, CQ10-130EF, CQ10-110SB, CQ10-100EB manual Connecting to a wired network