Removal and replacement procedures
3.Disconnect the left speaker cable 1 from the system board.
4.Remove the left speaker cable 2 from the clips and routing channel through which it is routed.
5.Disconnect the microphone cable 3 from the system board.
6.Disconnect the display panel cable 4 from the system board.
7.Remove the display panel cable from the clips 5 and routing channel through which it is routed.
8.Disconnect the TouchPad cable 1 from the LIF connector on the system board.
9.Disconnect the TouchPad on/off button board cable 2 from the LIF connector on the system board.
10.Disconnect the fingerprint reader board cable 3 from the system board.
