![](/images/new-backgrounds/1242115/242115169x1.webp)
Removal and replacement procedures
17.If it is necessary to replace the wireless antenna transceivers and cables, release the tabs 1 built into the display enclosure shielding.
18.Release the wireless antenna transceivers 2 from the display enclosure. The transceivers are attached to the enclosure with
19.Remove the wireless antenna transceivers and cables 3. The wireless antenna transceivers and cables are available using spare part number
20.If it is necessary to replace the microphone receiver and cable, remove the microphone receiver 1 from the clip built into the display enclosure.
21.Remove the microphone cable from the clips 2 and routing channel built into the right side of the display enclosure.
22.Remove the microphone receiver and cable 3. The microphone receiver and cable are available using spare part number
Reverse this procedure to reassemble and install the display assembly.