HP dv9000 manual Removing the USB/Magnetic Board

Removal and Replacement Procedures

2.Disconnect the USB/magnetic board cable 1 from the ExpressCard assembly.

✎The USB/magnetic board cable is included with the USB/magnetic board spare part kit and is also included in the Cable Kit, spare part number 434677-001.

3.Remove the silver Phillips PM2.5×5.0 screw 2 that secures the USB/magnetic board to the base enclosure.

4.Remove the USB/magnetic board 3.

Removing the USB/Magnetic Board

Reverse the above procedure to install the USB/magnetic board.

Maintenance and Service Guide 5–61