HP dv9000 manual Select Start Control Panel System and Maintenance System

Backup and Recovery in Windows Vista

Using System Restore Points

When you back up your system, you are creating a system restore point. A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system.

✎Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point.

You also can create additional restore points to provide increased protection for your system files and settings.

When to Create Restore Points

■Before you add or extensively modify software or hardware.

■Periodically, whenever the system is performing optimally.

✎If you revert to a restore point and then change your mind, you can reverse the restoration.

Creating a System Restore Point

1.Select Start > Control Panel > System and Maintenance > System.

2.In the left pane, click System protection.

3.Click the System Protection tab.

4.Under Automatic restore points, select the disk for which you want to create a restore point.

5.Click Create.

The System Protection window opens.

6.Follow the on-screen instructions.

Maintenance and Service Guide C–3